Aspen Blog Hop

Welcome to the Aspen blog hop! If you are following along, you got here from Tiare's BLOG.  If you have stumbled upon my blog or got here from Facebook, you can start back at the beginning to see ALL the amazing creativity from the bloggers this month HERE at Club Scrap Creates.

With this being Christmas week when the creative juices sometimes flow more slowly, I opted for a simple project this month. (This is mainly because I created this project the day after Christmas, when my energy level was low from all the festivities! I'm a natural procrastinator, though I've been trying to change that for years. I'm afraid it's too late.)

Here's the card I created with my Aspen kit. I call the technique "layering with ink" because there are no paper layers. In fact, the only paper used is a 5.5x8.5 piece of Almond paper.

Ink Layer 1 uses the 5.5x8.5 Almond paper folded in half, Club Scrap Hybrid Ink (Moss), and the leaf border stamp from the Aspen Borders and Backgrounds UM sheet.

For Ink Layer 2, tear off 3/4 inch from the front of the card and ink with Club Scrap Hybrid ink (Earth).

3rd Ink Layering Technique uses the group of trees stamp (also on the Aspen Borders & Backgrounds sheet), the same Moss ink, and a brown marker. I stamped once, then again (without reinking the stamp) a little higher and to the right to create more trees in the distance. I wanted more trees behind those on the left, so I inked the stamp again and stamped onto a scrap paper, then stamped some background trees on the left side of the first image.

For the greeting, I used a 4th ink layering technique with Moss and Earth CS inks, Post-It notes, an ink applicator, and the Happy Birthday stamp from the Aspen Greeting unmounted sheet.

For this technique, I ripped a little bit off the sticky ends off two Post-It notes, covered the area where I stamped the greeting, and lightly sponged ink over the tree trunks. Repositioning the Post-It notes, I inked under the greeting.

And that is how I used inks to create layering on my Aspen card. I have to admit that I was very tempted to add ribbon or other embellishing, but I held back and let inks take center stage.

Bonus project: For Christmas, my oldest daughter gave me a framed picture of her and her fiance from their engagement photo shoot. I'll have to ask her for another picture for the frame, because I just had to create a page! The papers, green ribbon, and buttons are from Aspen, while the words and alpha stickers are from Bridges (February 2006). Leaves are from my stash.

Thank you for visiting my blog. I hope you have been inspired to create something with your Aspen kit. If you don't have a kit, you can get one HERE. 

The next stop on the hop is Marya's blog. Click HERE.

It's Blog Hop Time!

Welcome, Hoppers! If you have just left Tiare's blog at iClassyGirl.com, then you are at the right place. If not, then hop on over to Club Scrap Creates to start at the beginning of this month's hop, so you don't miss any of the fun and creativity!

The featured kit this month is Lock & Key, and I challenged myself to come up with a Christmas card for this kit. The name doesn't really cry out "Christmas," does it? I knew I really had to put my thinking cap on! (To see the Christmas card I made with last month's Take Wing kit, go here.)

So, I was looking at the UM rubber, and the large words caught my eye. As a Christian, I believe that Jesus is the embodiment of these words: Hope, Faith, Love, and Joy. I realized that I had my connection between Lock & Key and Christmas!

 

I paired the words with the holy family and a snowflake from the Silent Night (December 2010) unmounted stamp sheet. Such unique artwork, don't you think?

Here's one of my final cards. Below you find the basic steps I used to create this unique card and four others.

However, if you are ready to hop on, your next stop is Marya's blog at A Notebook Novel.

I chose to work with five cards in the Lock & Key Greetings to Go pack. It's so handy to have cards that are precut and scored, with panels that fit so well! The pack even includes envelopes; I told you it was handy! Each month the Greetings to Go pack has 15 card/panel/envelope combinations (in three sizes) with cutaparts and fibers. One of my favorite Club Scrap products! (It's hard to tell, but those tan-colored panels are actually metallic--too cool!)
 

 

To start the cards, I stamped each of the ivory panels with the words using Club Scrap's Sandstone ink. An acrylic block with lines on it comes in real handy for keeping words straight.

 

On the words, I used CS Earth ink to stamp the holy family, then added snowflakes at half strength. Some folks call that "second generation" stamping. You just ink up the stamp, then stamp once onto scrap paper and then onto your project. You get half the amount of ink. I like the way Joseph, Mary, and the manger really stand out darker than the other elements. I stamped five similar ivory panels.  

When using metallic paper, I love to emboss it--there's something about the way the light hits the raised areas on metallics. Anyway, I used a Fiskars embossing plate for four of the panels and a Cuttlebug folder for the fifth. Since this Cuttlebug folder doesn't have an all-over design, I wasn't sure how I was going to use it, but I came up with a way. Below are the embossed panels. The fourth one is the Cuttlebug one.

And here, again, is my favorite of the five cards. I just layered the stamped and embossed panels on the card base and added some torn handmade paper and brads (the paper was from a 2003 (?) CS kit called Evergreen. I like the addition of the green for Christmas, but a deep red or burgundy would look nice.

Below are the other four cards. You can see the way I used the Cuttlebug embossed metallic on the top card--just cut along the image with a craft knife to create a frame.

I hope you enjoyed a little early Christmas cheer using Lock & Key in an unexpected way. Next month's kit is Fire & Ice. Oh, dear!!

Thanks for making it to the end of my post. Your next stop on the hop is Marya over at A Notebook Novel. I'm looking forward to her Lock & Key creation!

My Personal Challenge--September

I love to challenge myself. Whether it is to avoid sweets for a week, keep my desk decluttered, or create a certain number of page or cards, challenging myself gives me an opportunity for personal success. Don't you agree?

Now I have challenged myself to something new for the rest of the year. I'm going to create a Christmas card using each of the September thru December Club Scrap kits. This month's kit, Take Wing, has a bird, feather, swirl theme--not too Christmas-y, I know! But, the colors are navy, red, white, and two shades of green. Jackpot!

I used the twig UM stamp from the Collection sheet of rubber with Moss ink, then I added a touch of glue to each of the little balls on the ends of the branches and sprinkled with red glitter. Voila! They may look more like "Charlie Brown" Christmas trees, but I think they are festive! The "Joy" stamp and the "Joy Cheer" smaller stamp are from the Old World Christmas stamp set from way back in 2008. That one is no longer available through CS, but I have a few in my inventory that I can let go for $12 + shipping. If interested, leave a comment below with your email address, and we can chat. (I'll delete your comment so your email address isn't there any longer.)

Next month's kit is called Lock & Key. I hope I can meet the challenge and come up with a Christmas card design with that one! Stay tuned! And, if you are so inclined, leave a comment below on a way that YOU challenge yourself!

Nesting with Take Wing collage stamp

Earlier this month I posted my first attempt at layering a stamped image using Nestabilities dies. You can see that post here. Last week I purchased the A2 matting dies and found that they are perfect for playing with this technique.

The card features the collage stamp from Club Scrap's Take Wing collection UMs.  Isn't this a great sheet of rubber? So many possibilities! The green paper is from Take Wing, while the beautiful blue and the red ribbon are from Peacock (October 2012).

Stay tuned for my next post where I show how I used one of these stamps on a Christmas card. Hmmm . . . which one will it be?

Take Wing Blog Hop!

 Welcome to my blog and thank you for following the September 2013 Club Scrap Blog Hop featuring the Take Wing collection! The starting point of the hop is Club Scrap Creates. There you will find the list of participating bloggers who are all creating with this cheerful kit!

My creation is a card featuring the collage image from the Borders & Backgrounds unmounted (UM) stamps. The technique came from the creative team at Technique Junkies and is found in their August/September 2013 newsletter. Their newsletters are full of fun and creative techniques, and they have CDs with tutorials, too! You can visit the TJ blog at http://techniquejunkies.blogspot.nl/.

This technique is called the Blocked Backgrounds Tutorial.

The supplies you need to create this card are:
5.5x8.5 White cardstock (folded in half for the card base)
5.25x4 Red Translucent 
5x3.75 White cardstock panel
Printed cardstock for the bird 
Black paper/cardstock (not shown)
White paper/cardstock for the sentiment
Green bird brad

Tools needed:
UM collage stamp and mounting block
Post-It notepad
Club Scrap India Black ink
Clear ruler (I love the Club Scrap 2x8 ruler for this technique!)
Black Sharpie marker (not shown)
Take Wing stencil
Paper piercer 
Scissors
Sentiment stamp

 

Step 1: Use Post-It notes to block off the top left quadrant of the White panel. Ink the collage stamp well with India Black ink, and stamp onto the quadrant. (You want to stamp off the edges of the panel, so be sure to have scratch paper underneath.)

 

Steps 2 & 3: Repeat the same technique in the upper right quadrant, being sure to leave a space between the stamped images. You want an intersection of white, like crossing streets along city blocks. Add a third stamped image in the bottom left quadrant, again leaving a space. (I added a piece of red foam under the panel to make the panel more noticeable in the pictures.)

Step 4: Again, repeat the stamping, this time in the lower right quadrant. Notice that I used the same two Post-It notes in each step. I'm a frugal crafter!

 Here is the stamped panel. I did not measure my spaces between the stamped images. I might try using pieces of low-tack tape (like Washi tape) to separate the quadrants next time. That would ensure even spacing, though my perfectionist tendencies have dissipated as I've gotten older. :-) 

 

Step 5: Using a Sharpie pen and clear ruler, draw lines around each block, like curbs around city blocks. My corners are not perfect (see the previous paragraph). I knew I was covering the intersection with a cut-out, so I wasn't too worried about it. The "Blocked Backgrounds" panel is complete. Not shown: Edge the panel using a black stamp pad.

To add a focal image to the card, I chose the bird from the Take Wing collection stencil. I moved the stencil around on the printed paper (below). Since I was using the Red Translucent paper behind the stamped panel, I chose the section with the red "branches."

Hmmm . . . I didn't want to trace the bird onto the front of the paper, because I wanted a nice, clean image. I discovered that if I used a paper piercer to place a tiny indent at the beak and the tail (not shown), I could flip the paper over, find the raised marks, and line up the reversed stencil the way I wanted it. I traced with a pencil and cut out the bird with scissors. (I left off the bird's feet, as cute as they are.)

The printed bird blended in too much with the background. Adhering it to black paper not only added contrast but also made her just a bit bigger. And adding dimensional tape raised her off the panel. Below: A simple white panel for the greeting doesn't detract from the artwork.

I'm so glad you visited my blog today, and I hope you give this fun background technique a try! Your next stop on the hop is Marya's blog.  Continue hopping along to see more creativity with Take Wing!